US-assembled in Brooklyn
Built and commissioned at our Brooklyn facility, not drop-shipped from a container. You get a domestic point of contact for the life of the unit.
Healthcare-Grade
Sanitary turnstiles for clinical and food-grade environments
Stainless steel turnstiles built to be wiped down, hosed off, and disinfected without degrading the finish. Designed for hospitals, labs, food production, and pharma.
304/316 stainlessIP54 wash-downHands-free entry
Continuous welds, smooth radii, no bolt heads or seams to harbor contaminants. Available in 304 or 316 stainless.
IP65
Washdown Rating
316
Marine Grade Steel
FDA/HACCP
Environment Ready
5yr
Warranty
Indicative pricingContact for quote
Features
Why facilities choose our sanitary barriers
Antimicrobial AISI 316 Steel
Marine-grade stainless steel with inherent antimicrobial properties resists bacterial growth and corrosion from cleaning chemicals.
IP65 Washdown Capable
Fully sealed against water jets from any direction. Clean with hoses, pressure washers, and chemical sanitizers without risk.
Supports FDA/HACCP Environments
Designed for use in facilities operating under FDA and HACCP standards. Food-safe materials throughout with no contamination risk.
Smooth, Crevice-Free Design
No joints, seams, or hidden surfaces where bacteria can accumulate. Every surface is accessible for thorough sanitization.
RFID/Card Reader Integration
Supports RFID, proximity cards, and biometric readers. Tie into hygiene compliance systems for handwash or gowning verification.
Food-Safe Materials
Every component uses non-toxic, food-safe materials. Sealed electrical enclosures prevent any contamination of controlled environments.
See it in motion
Hands-free, hygienic cycling
A stainless barrier that cycles hands-free for cleanroom and healthcare zones. Shown here as a motion visualization built from our product renders, not footage of a specific site.
Certified & warranted
- ISO 9001quality-managed manufacturing
- UL-listed componentskey electrical parts
- ADA 2010 §404accessible lane options
- IP54 – IP65sealed for indoor & outdoor duty
- 5-year warrantymotors, electronics & metalwork
Works with your access control
The barrier is credential- and panel-agnostic: it takes the signal from the reader and controller you already run. Compatible with the major platforms by design.
- HID
- LenelS2
- Genetec
- Brivo
- AMAG
- + all major ACS
Via standard Wiegand, OSDP, RS-485 & dry-contact interfaces.
Trusted by industry leaders
Where it deploys
Built for the room it lands in
Renders and deployment visualizations across the environments this line is built for, not photos of specific customer sites. Scroll to rotate the ring. Ask us for real reference projects on a call.
Pharmaceutical cleanroom
Life sciences
Food processing entry
Food & beverage
Hospital surgical wing
Healthcare
Biotech R&D corridor
Biotech
Studio profile
Full unit
Stainless & seal detail
Detail
Specifications
Technical details
construction
- Material
- AISI 316 SS
- Surface
- Smooth, crevice-free
- Properties
- Antimicrobial
- Food-Safe
- Yes
performance
- IP Rating
- IP65 (washdown)
- Power
- 24V DC
- Operating Temp
- 32°F to 104°F
- Emergency
- Fail-safe/secure
compliance
- FDA/HACCP
- Suitable
- Environment
- FDA/HACCP ready
- Steel Grade
- Marine grade 316
- Certifications
- CE, UL
integration
- Protocols
- Wiegand, OSDP, RS-485
- Readers
- RFID / Card / Biometric
- Inputs
- 4 programmable
- Hygiene Tie-In
- Handwash verify
Owning it after the install
The part most brands go quiet about
Serviceability, spare-parts speed, and who actually answers the phone decide your year-five maintenance budget more than the spec sheet does. Here is how buying manufacturer-direct changes it.
Same-day US parts
Spare motors, boards, sensors and seals ship same-day from Brooklyn inventory: no customs hold, no import-parts risk when a European supply line goes dark.
Serviceable by design
Front-access panels and modular drives mean a tech reaches the controls without dismantling the whole lane. Standard hand tools, documented procedures.
A direct engineer in 24h
Manufacturer-direct support with no distributor layer. The people who build and program the hardware answer integration and service calls, typically within 24 hours.
Healthcare-grade access, answered
Sanitary barrier FAQs
A sanitary barrier is a waist-high access control gate specifically engineered for hygiene-critical environments. Unlike standard turnstiles with joints, crevices, and hard-to-clean surfaces, sanitary barriers feature smooth, seamless construction from AISI 316 marine-grade stainless steel with antimicrobial properties. They are IP65 rated for washdown cleaning and use food-safe materials throughout.
Our DT 590 sanitary barriers are designed for use in FDA/HACCP-regulated environments. They use food-safe, non-toxic materials, AISI 316 stainless steel with inherent antimicrobial properties, smooth crevice-free surfaces that prevent bacterial buildup, and IP65 waterproofing that allows direct washdown cleaning with sanitizing agents without risk of electrical damage. Note: the barriers are suitable for these environments but are not themselves FDA/HACCP certified products.
Yes. Gatestile sanitary barriers carry an IP65 rating, meaning they are fully protected against water jets from any direction. You can use standard washdown procedures with hoses, pressure washers, and chemical sanitizers without damaging the electronics or mechanical components.
Ready for hygiene-grade access?
Get detailed pricing for your sanitary barrier project within 24 hours. FDA/HACCP compliance documentation and integration recommendations included.
25+Years Manufacturing
53Models
3–8 wkLead Time
5-YearWarranty
No commitment · 24hr response · (929) 814-2966
