Tripod Turnstiles
per laneWaist-high three-arm access control. The cost-effective workhorse for gyms, transit, and staff entrances.
Turnstiles for sale · manufacturer-direct
US-assembled turnstiles run from about $3,000 per lane for a tripod to $60,000 per unit for a glass rotating mantrap, hardware only. Pick your class below, see the published band, and get an exact configured quote back within 24 hours. No integrator markup, no waiting on a boat.
Every class, every band
Bands are hardware-only, per lane unless noted, drawn straight from our 2026 cost guide. Configure any class and we send back an exact number with the install line items broken out.
Waist-high three-arm access control. The cost-effective workhorse for gyms, transit, and staff entrances.
Mid-height deterrence with an open, approachable feel. A step up from tripods without a full-height footprint.
Anti-climb perimeter security for unmanned entrances, stadiums, and industrial sites.
Motorized glass barriers with optical tailgating detection. The Class A office lobby standard.
Wide-lane accessible passage, motorized and fail-safe. Pairs with any turnstile bank for compliant egress.
360-degree mantrap security with anti-piggybacking interlock for high-security lobbies.
Washdown-ready stainless for healthcare, food processing, and cleanrooms. Configured per environment.
Bands assume standard configurations. Material grade (AISI 304 vs 316), enclosure rating (IP54 vs IP65), and the reader package move you within each band. Installation adds $2,000–$8,000 per lane.
Why buy from the factory
You buy from the factory, not a reseller. No opaque integrator markup layered on top of the hardware.
US-assembled ships in 3–8 weeks for standard configs, against 10–14 weeks for imported units on a boat.
We publish real per-lane ranges up front so you can budget before a single call. Most incumbents make you ask.
Every unit carries a 5-year warranty, backed by a US spare-parts inventory and factory-direct support.
Trusted by industry leaders



























Owning it after the install
Serviceability, spare-parts speed, and who actually answers the phone decide your year-five maintenance budget more than the spec sheet does. Here is how buying manufacturer-direct changes it.
Built and commissioned at our Brooklyn facility, not drop-shipped from a container. You get a domestic point of contact for the life of the unit.
Spare motors, boards, sensors and seals ship same-day from Brooklyn inventory: no customs hold, no import-parts risk when a European supply line goes dark.
Front-access panels and modular drives mean a tech reaches the controls without dismantling the whole lane. Standard hand tools, documented procedures.
Manufacturer-direct support with no distributor layer. The people who build and program the hardware answer integration and service calls, typically within 24 hours.
Buyer FAQs
Commercial turnstiles range from about $3,000 per lane for entry-level tripod turnstiles to $60,000 per unit for premium glass rotating units, before installation. Mid-tier optical speed gates (the typical Class A office choice) land in the $8,000 to $22,000 per-lane range. Full-height industrial turnstiles run $7,000 to $18,000 per lane. Add roughly $2,000 to $8,000 per lane on top for installation, freight, and commissioning.
Tripod turnstiles are the cheapest commercial-grade option, starting around $3,000 to $5,000 per lane for a basic indoor unit with a single reader integration. They are widely used in gyms, transit, and budget-conscious access control deployments. Below that price point you are typically looking at consumer hardware that will not hold up to high-traffic use.
Installation typically adds $2,000 to $8,000 per lane on top of the hardware cost in the US, depending on site conditions. The line items are freight, anchoring and floor prep, conduit and low-voltage wiring, and commissioning with the access control head-end. Outdoor and IP65-rated installs run higher because of weatherproofing and surface-mount enclosures.
Our US-assembled turnstiles typically ship in 3 to 8 weeks for standard configurations, depending on the product line. Imported turnstiles from European or Asian manufacturers commonly run 10 to 14 weeks door-to-door once you account for ocean freight and US customs. Custom finishes or biometric reader integrations can extend either path by 2 to 4 weeks.
Buying direct removes the integrator's hardware markup, while the integrator's fee covers project management, install labor, and access-control programming. Direct purchase makes sense when you have an in-house facilities team or a separate low-voltage contractor. Integrator pricing makes sense for single-source accountability on complex multi-system jobs.
Full breakdown with every line item in the 2026 turnstile cost guide.
Send us your project and a Gatestile engineer returns a configured hardware quote with install line items broken out, within 24 hours. No pressure, just numbers you can compare against your shortlist.
No commitment · 24hr response · (929) 814-2966